Yanping, representative of Yuchai group: "beauty" is inseparable from science and technology
Yanping, representative of Yuchai group: "beauty" is inseparable from science and technology
China Construction Machinery Information
Guide: China's economy has entered a single digit growth stage from a long period of double-digit growth. At this stage, to break through the bottleneck of self-development and solve deep-seated contradictions and problems, the fundamental way out lies in innovation, and the key lies in the strength of science and technology p>
"China's economy has entered a single digit growth stage from a long period of double-digit growth. At this stage, to break through its own development bottleneck and solve deep-seated contradictions and problems, the fundamental way out lies in innovation, and the key lies in science and technology." At present, automobile exhaust emission is a national and even global problem. Every year, 3/4 of the freight volume in the country depends on diesel powered road transportation. The huge market holding volume consumes huge oil resources. The internal combustion engine industry is a major energy consumer, but the implementation of energy conservation and emission reduction can also tap the potential. Compared with the advanced level of foreign countries, China lags behind in that the fuel consumption rate is about 15% higher than that of foreign countries, and the emission standard is lower than that of foreign countries by 1 to 2 times. Energy conservation and emission reduction has become a necessary way for a country to achieve sustainable development. It is suggested that the state should formulate energy-saving and emission reduction policies, take the national and industry wide emission control as the basic starting point to effectively avoid the impact and upgrading of the sample when leveling the electromechanical start-up, and take the emission regulations and policies for commercial vehicles as the focus of motor vehicle emission control, with a height of 214 mm
this information is true. 2. The selection of clip arc radius r according to the wire diameter in the parameter table is not verified by the information of China Construction machinery. It is for your reference only. Please do not reprint without permission. If it has been used under this authorization, it shall be used within the scope of authorization, and "source: China Construction Machinery Information" shall be indicated
Copyright © 2011 JIN SHI